Skip to content

Winter motorcycle jacket: membrane, lining and EN 17092 class

Written by the MotoComparo team, independent comparison site · prices checked every day

Black textile motorcycle jacket with fluorescent yellow details and a removable quilted lining, on a hanger in front of a white wall.

Key points

  • A jacket is not a legal requirement in France, unlike gloves; it is a protection choice, and the EN 17092 class is the measure of it.
  • For winter, read the listing in this order: the class (AA for everyday use), then the waterproof membrane, then the thermal lining.
  • A membrane keeps water out; a water-repellent treatment alone does not: it wears off and has to be renewed.
  • A listing that says nothing about the class or the membrane proves nothing: the sewn-in label and the manufacturer's instructions are what count.

This article is for anyone buying a motorcycle jacket to ride from October to March who is torn between listings with similar-sounding words: “waterproof”, “water-repellent”, “lining”, “CE-approved”. It explains what the law says, what the EN 17092 standard measures, and what the membrane and the lining mean. The tables come from the MotoComparo catalogue and are recalculated when the page opens; the technical and legal facts are taken from the sources listed at the end of the article.

What the law requires

The Highway Code requires gloves: when on the road, every rider or passenger of a motorcycle must wear gloves that comply with the regulations on personal protective equipment, and the offence is punished by a third-class fine and the loss of one licence point (article R431-1-2, Légifrance, in force since 20 November 2016). A CE-approved helmet and a high-visibility vest, to be worn or stored on the motorcycle, complete the list according to the Service-Public page “Mandatory equipment for riding a motorcycle” (checked on 16 June 2026).

That page does not mention the jacket. It is therefore not required by these texts, which does not mean it is optional when it comes to protection: it is precisely the EN 17092 standard that makes it possible to compare one jacket with another. For gloves, see our guide summer, mid-season or winter motorcycle gloves.

The EN 17092 standard and the CE marking

The EN 17092 standard covers motorcycle jackets, trousers, one-piece suits and two-piece sets. It has six parts: one for the test methods, then one for each class, according to the description from the Eurofins laboratory.

  • Class AAA (part 2): the highest level of protection.
  • Class AA (part 3): a medium level of protection. The BSI catalogue Describes it as limited protection against abrasion and impact for road use, with requirements higher than class A and lower than class AAA.
  • Class A (part 4): light protection, the minimum necessary.
  • Class B (part 5): the abrasion resistance of class A, but without impact protectors.
  • Class C (part 6): a garment whose only purpose is to hold one or more impact protectors in place.

These descriptions concern abrasion and impact. Neither the membrane nor the lining appears in them: a winter jacket is not “more protective” because it is warm, and a class AA jacket is not waterproof because it is class AA.

Motorcycle clothing also falls under European regulation 2016/425 on personal protective equipment, and carries the CE marking. The French road safety authority (Sécurité routière) presents the jacket as an item of personal protective equipment certified as such, with a “CE” label and the motorcycle logo (“The jacket” page).

Impact protectors

A jacket generally includes shoulder and elbow protectors. They fall under the EN 1621-1 Standard, which assesses Armour worn on the gaskets of the limbs: the lower the force a protector transmits, the more protective it is judged to be, according to the testing body SATRA. Sécurité routière states that back and chest protectors can be bought separately from the jacket. The listing should therefore say what is supplied, not just what the jacket can accommodate.

What the listings in our catalogue declare

The following tables count the comparable jackets in the catalogue (sold by at least two merchants, with a known price) according to what their merchant listing states. They count what merchants declare: a listing that says nothing does not mean the jacket lacks the feature.

Declared protection class

EN 17092 classFichesMedian priceLowest price
A 1 402 155,99 € 64,00 €
AA 1 339 233,90 € 53,00 €
AAA 137 316,63 € 129,96 €
B 6 100,05 € 100,05 €
C 2 214,94 € 214,62 €

Of 4 135 comparable listings in the category, 2 886 state this feature on their merchant page (70%). The others simply do not mention it — it is not a confirmed absence.

Among the listings that specify it, the class most often declared is “A”.

Declared waterproof membrane

Waterproof membraneFichesMedian priceLowest price
Yes 1 965 194,32 € 24,40 €

Of 4 135 comparable listings in the category, 1 965 state this feature on their merchant page (48%). The others simply do not mention it — it is not a confirmed absence.

Declared thermal lining

Thermal liningFichesMedian priceLowest price
Yes 1 466 203,74 € 29,00 €

Of 4 135 comparable listings in the category, 1 466 state this feature on their merchant page (35%). The others simply do not mention it — it is not a confirmed absence.

Membrane and lining: water and cold

Membrane or water-repellent

A membrane is a layer whose pores let water vapour through from the inside to the outside but not raindrops, according to the manufacturer ixs. The water-repellent treatment (DWR, durable water repellent) is something else: a very thin coating on the outer fabric that makes water bead up instead of soaking in, as Gore-Tex explains for its own products.

The two do not wear out in the same way. According to Gore-Tex, the water-repellent treatment is not permanent: when water stops beading, it no longer works properly, and the garment stays waterproof thanks to its membrane but can become cold and damp to the touch. iXS says the same thing in other words: if the outer fabric is wet, the breathability of the membrane is severely limited. Both manufacturers describe washing and tumble-drying to reactivate the treatment, then a spray if that is not enough.

Thermal lining, removable or not

A thermal lining adds an insulating layer on the inside; it is called removable when it can be taken out of the jacket. The listings in the catalogue distinguish between these two cases, and also between a lining that is supplied and one that is only “provided for” (a fitting, with the lining sold separately). A listing that says “prepared for lining” does not come with a lining.

The lining does not appear in the EN 17092 standard, which concerns protection. It is therefore judged neither on the class nor on the membrane: it is read on the listing, on the “thermal lining” line, and then on the manufacturer's instructions.

How to choose

The following order applies to all listings: protection first, then water, then cold.

  1. The EN 17092 class. Class AA describes a medium level of protection, class A light protection; a winter jacket can fall into either. The criterion depends on use: the daily commute, touring, city riding.
  2. The membrane. It decides the water question. Rule out listings that only advertise a water-repellent finish if you ride in the rain.
  3. The lining. It decides the cold question. Check whether the listing says it is removable, supplied or only provided for.
  4. The protectors. Check that shoulders and elbows are supplied and of what level (EN 1621-1, level 1 or 2), and whether the back protector is supplied or sold separately.

Size and visibility

Sécurité routière asks for a jacket loose enough to be comfortable but tight enough to limit knocks, with snug cuffs. It also recommends bright colours and retroreflective features to be seen by day and by night. Sizes do not correspond from one brand to another: compare your measurements with the brand's guide rather than going by your usual letter size.

Before buying, and to compare prices

  • The label. It must cite EN 17092 and the class. If the listing does not show it, ask the merchant.
  • The airbag. A jacket's compatibility with an airbag cannot be deduced from the model: it exists only if the listing or the manufacturer's instructions say so.
  • Care. Follow the manufacturer's instructions: they take precedence over the general advice from the sources cited here.
  • Prolonged cold. A jacket insulates the torso; the hands depend on gloves, see winter gloves.

To compare today's prices:

Frequently asked questions

Is a jacket mandatory on a motorcycle?

No, according to the Service-Public and Légifrance pages consulted, which require a helmet, gloves and a high-visibility vest without mentioning the jacket. Gloves, on the other hand, are mandatory for the rider and the passenger (article R431-1-2 of the Highway Code).

What is the difference between a membrane and a water-repellent treatment?

The membrane is an inner layer that keeps water out while letting vapour escape; the water-repellent is a treatment of the outer fabric that makes water bead up and that wears off (iXS, Gore-Tex). A listing that says only “water-repellent” does not signal a membrane.

Which EN 17092 class do you need for a winter jacket?

The standard does not answer by season. It describes class AA as a medium level of protection and class A as light protection (Eurofins, BSI). The choice is made on use, then on the membrane and the lining.

What does the CE marking mean on a motorcycle jacket?

The jacket is an item of personal protective equipment subject to European regulation 2016/425, and the label carries “CE” with the motorcycle logo (Eurofins, Sécurité routière). The marking does not on its own state the class: it is read on the label with the EN 17092 reference.

Are the protectors and the back protector supplied with the jacket?

Not always. Elbow and shoulder protectors fall under the EN 1621-1 standard, and Sécurité routière states that back and chest protectors can be bought separately from the jacket. The merchant's listing should say what is supplied.

Sources

  1. Article R431-1-2 of the Highway Code, Légifrance.
  2. Mandatory equipment for riding a motorcycle, Service-Public (DILA), page checked on 16 June 2026.
  3. Regulation (EU) 2016/425 on personal protective equipment, EUR-Lex.
  4. Safeguarding bikers: navigating EU regulations for motorcyclist protective garments, Eurofins.
  5. BS EN 17092-3:2020, class AA, BSI.
  6. EN 1621, motorcyclists' protectors, SATRA.
  7. “Équipez-vous” campaign, “The jacket” page, Sécurité routière.
  8. Membrane (blog), iXS.
  9. Durable Water Repellent (DWR) in GORE-TEX Products, Gore-Tex.

Read also

The prices and specifications quoted here are those recorded by MotoComparo at the time of reading; they change with the market. No test impressions are reported here: the site has no test bench and nobody here has worn this gear.